Sintered Segment Welding Blade

Quantity Order:

Origin:

China

Pressure Diamond Saw Blades(HOT AND COOL):They take shape and have knife head of binding strength with high sharpness. Especially, the such saw blade can only be manufactured through compression, but product specification should usually be below diameter400. Proper pressure is applied tu hot compression saw blades under the high temperature above 800 degree, so that the have more even and higher density and better binding strength between the cast and the diamond and bast. Cold compression saw blades have similar process. However the pressure is not applied in the process of heat-treament, so that their physical properties such as density and strenth are inferior to hot compression saw blades, although with low production cost and sharpness.
Features:
(1)Product Name: Sintered Segment Welding Blade
(2)Place of Origin: China
(3)Item No.:JK/105, JK/108, JK/110, JK/114, JK/115, JK/125, JK/150, JK/180, JK/200, JK/230,JK/250,JK/300,JK/350
(4)Dimensions(Outer Diameter*Hole Diameter*Segment Dimensions,No. of Segment . Unit mm): 105*20/22.2*1.8*7.5,8; 108*20/22.2*1.8*8.5,8; 110*20/22.2*1.8*12,6; 114*20/22.2*1.9*1.5,8; 115*20/22.2*2*7.5,10; 125*22.2/25.4*1.9*7.5,10; 150*22.2/25.4*1.9*7.5,11; 180*22.2/25.4*2.6*8,14; 200*22.2/25.4*2.6*8,14; 230*22.2/25.4*2.6*8,14; 250*22.2/25.4*2.6*8,18; 300*50/25.4*2.8*8,22; 350*50/25.4*2.8*8,24
(5)Inner packing: One plastic, the other side paper, paper box Outer packing: Carton

Recommend to your friends