Specification :

Vipeak Sand Making Machine ( namely PCL Vertical Shaft Impact Crusher) is of high-power and low-consumption stone crusher.

Vipeak Sand Making Machine ( namely PCL Vertical Shaft Impact Crusher) is of high-power and low-consumption, which is designed depending on several years hard work and study of mechanical mining equipment. Sand Making Machine absorbed the advanced technology of the same products of Barmac Company of America, now is of the international level. Vertical Shaft Impact Crusher plays an important role in crushing minerals into pieces. PCL Vertical shaft Impact Crusher is widely used in all kinds of mineral, cement, corhart, carborundum grain, glass raw material, machine making construction sand, stone stock and all kinds of metallurgy slag, especially carborundum, sintered bauxite, magnesite, and so on materials with features of very hard and anticorrosion. And Vertical Shaft Impact Crusher is more productive than other kind of crushers.

Characteristics of Vertical Shaft Impact Crusher:
Simple structure and low operating cost;
High crushing ratio with low consumption;
Function of fine crushing and crude grinding
Slightly influenced by moisture content of material, and the max moisture content is about 8% ;
More suitable for crushing mid-hardness and high hardness materials;
Cubic shape of final products, high density of piling up and low iron pollution;
More wearable and easier maintenance;
Low working noise ( lower than 75 decibel) and light dust pollution.

Vipeak sand making machine ( VSI Series Vertical Shaft Impact Crusher) Working Principle:
In Centrifugal impact crusher, material of high speed is crushed by self-broken mutual friction. Centrifugal impact crusher can not only crush but also shape stones.
According to feeding method, centrifugal impact crusher working form is divided into central feeding and central with cascade feeding. The crush form is divided into " rock on rock" and " rock on iron" According to material compressive strength, abradability. There are four working forms: central with cascade feeding " rock on rock" and rock on iron" ; central feeding " rock on rock" and rock on iron" .

VSI Series Vertical Shaft Impact Crusher Daily Maintenance:
1) There should be some person responsible for the machine. Operator should be trained. understand technical performance of the equipment, familiar with the rules.
2) To keep machine smooth running, draw out regulations of machine maintenance and safe operation. Meantime prepare necessary maintenance tools, lubrication material and other related equipments.
3) Check firmware every shift, fasten immediately if any flexible.
4) Stop the machine termly, open the checking door and check inside wear condition. Replace and remove immediately if any wear, werable block should be changed whole set if any wear to keep impeller balance in running. Replace or repair immediately if any wear on impeller.
5) Check impeller firmware every 7 days, wearable parts should be replaced and repaired if any wear.
6) Check firmware and wearable parts in whirlpool chamber every half a month, if any abnormal condition, take immediate means to remove.
7) Thin oil station use 35# bearing oil, oil amount is 150-190L. Change oil in 200hours first time, then change oil every 1000. when change oil, open the oil pipe, clean and dry it, change damaged seal mat.
8) Driving V belt tensioning is moderate, make sure v belt strain evenly, motors in two sides are imbalanced, the electricity current is not more than 15A.
9) Check hydraulic system frequently, maintain immediately if any abnormal phenomenon.
10) Add calcium base grease to seal ring under bearing chamber regularly.
11) Open the bearing tube and clean in 1000 hour' s normal running first time.

Model: PCL Series
Impeller Speed( r/ min) : 800-2600
Capacity ( t/ h) : 8-360.
if you are interest in it , please visit our webside:
http: / / www.crushingmill.com/
http: / / www.vipeakgroup.com/
http: / / www .grinderpro.com/
http: / / www.vipeakgrinder.com/
Welcome to inquiry!